- #AIRPORT EXTREME BASE STATION MANUAL FOR FREE#
- #AIRPORT EXTREME BASE STATION MANUAL FOR MAC#
- #AIRPORT EXTREME BASE STATION MANUAL MANUAL#
PC with Windows XP (SP3), Windows Vista (SP2), Windows 7 (SP1), or Windows 8Īpple takes a complete product life-cycle approach to determining our environmental impact.Any Wi‑Fi-enabled device that uses the 802.11a/b/g/n/ac specification.Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3.
Relative humidity (operating): 20% to 80%, noncondensing.Operating temperature: 32° to 95° F (0° to 35° C).Three Gigabit Ethernet LAN ports for connecting a computer, Ethernet hub, or networked printerĮlectrical and Environmental Requirements.USB 2 port for connecting a USB printer or hard drive 3.Gigabit Ethernet WAN port for connecting a DSL modem, cable modem, or Ethernet network.Simultaneous dual-band 802.11ac wireless.
#AIRPORT EXTREME BASE STATION MANUAL FOR FREE#
#AIRPORT EXTREME BASE STATION MANUAL FOR MAC#
AirPort Utility for Mac available for free download.
#AIRPORT EXTREME BASE STATION MANUAL MANUAL#
NAT, DHCP, PPPoE, VPN Passthrough (IPSec, PPTP, and L2TP), DNS Proxy, IPv6 (6to4 and manual tunnels).Interoperable with 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ac-enabled Mac computers, iOS devices, Apple TV, Windows-based PCs, and other Wi-Fi devices.Channels 1-13, 36-64, and 149-165 approved for use in Australia, Hong Kong, and New Zealand.Channels 1-13, 36-64, and 100-140 approved for use in Europe and Japan.Channels 1-11, 36-116, 132-140, and 149-165 approved for use in the United States and Canada.Radio output power: 32.5 dBm maximum (varies by country).On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.Ģ.(Note this is the device that you want to access from a remote location.)ĪirPort Utility > Select the base station > Manual Setup > Internet > DHCP tab Reserve a DHCP-provided IP address for the host device. For either the 802.11n AirPort Extreme Base Station (AEBSn) or Time Capsule (TC) you can connect to either the base station's Wi-Fi network or temporarily connect directly, using an Ethernet cable, to one of the base station's LAN (opposing arrows) ports, and then, use the AirPort Utility, in Manual Setup, to make these settings:ġ. To setup port mapping on an 802.11n AirPort Express Base Station (AXn), connect to the base station's wireless network.
Port mapping instructions for v6.x can be found here.) You will need v6.x, running on OS X Lion + or iOS to administer the 802.11ac base stations. They are designed to work with the family of 802.11n AirPort base stations: AirPort Extreme, AirPort Express, and Time Capsule. (Note: These instructions will not work with the 802.11ac versions of the AirPort base stations. The following instructions provides the basics for setting up the 802.11n AirPort base stations for port mapping/forwarding using v5.x of the AirPort Utility or the AirPort Utility for Windows:
0 kommentar(er)
